"We had a production problem. Our equipment for a surface mount circuit board seperation process was hurting us on cost, and we needed a better way. 4M designed and built a take-up reel system to our specs. Our margins are significantly better and the system is working just fine."
|
|
 |
| Bill Ugenti, VP, Engineering, Win-Spec Corp |
| |
|
"The Problem was real, but the solution was a mystery. On paper it should have worked, but it didn't stand up to the testing. Putting our heads together with the people at 4M resolved the issue, also saving alot on production.
--Thanks 4M."
|
 |
| |
|
"We required a mechanized tool capable of grabbing, holding and to allow twisting of seven optical fibers in order to facilitate fiber coupling. We got it from 4M."
|
 |
| Dave Stowe, Ph.D., Research & Development, Aster Corp. |
| |
|
"We couldn't find a vendor who would take it on! An accelerated life cycle test for an innovative system required a breakaway flap of 1/1000 of an inch thickness. 4M created a production process to fashion it and the beta to test it."
|
 |
| Rob Cannetti, Project Engineer |
|
"Local manufacturer needed better than a 48 hour turn around for a strong, working 3D prototype. We met the schedule and beat the price from their usual out of state vendor. You can't beat a local service like 4M for speed and flexibility."
|
 |
| Mike Fasano, President, 4M Instrument & Tool LLC, Islandia, NY. |
| |
|
